Kayayyaki
-
Injin nadawa fan takarda
Saurin sauri da aiki barga
Gudun daidaitacce
Ci gaban kai & mallaka
Sauƙaƙan Kulawa, yanke shuru
Tasha gaggawa don aikin aminci
2, GabatarwaofInjin nadawa takarda fan
1, Max takarda nisa iya zama a cikin 500mm za a iya folded ga wannan inji.
2, Tsawon zai iya zama 7inch, 7.25inch, 7.5inc, 7.75inch 8inch….. zuwa 15inch max.
3, Babu buƙatar amfani da motar don ɗaukar takarda, ana yin lodi ta atomatik.
4, Bangaren sawa shine yankan, wanda ke buƙatar canzawa kowane rabin wata.Don haka buƙatar haɗa da ƙarin abin yanka lokacin siyan injin.
5, Babu buƙatar daidaita injin lokacin ninka takarda mai nauyi daban-daban.Takarda na iya zama daga 40-150g/㎡.
-
Layin kera wasiƙar gidan saƙar zuma
1) Samfuran mu suna da tsarin layi mai sauƙi wanda ya sa su sauƙi don shigarwa da kuma kula da lokaci.
2) Don tabbatar da mafi kyawun aiki, muna amfani da inganci mai inganci, manyan abubuwan da aka sani a duniya a cikin pneumatic, lantarki da tsarin aiki na samfuranmu.
3) Samfuran mu sun ƙunshi ingantacciyar hanyar rufewa mai ƙarfi da tsafta ta amfani da manne mai dogaro da muhalli da tsadar ruwa wanda ke raguwa ta zahiri akan lokaci.
4) An tsara samfuranmu don yin aiki tare da babban digiri na atomatik da hankali, yayin da suke mai da hankali ga yanayin da kuma kasancewa masu haɗin gwiwa a duk matakan samarwa.
-
Kayan saƙar zuma kunsa matattarar yin inji
Babban sigogin fasaha na saƙar zuma kunsa na'ura mai yin na'ura EVH-500:
1.Mai amfani da kayan 80G kraft takarda
2. Faɗin kwance≤500mm, diamita unwinding≤1200mm
3.Speed 100-120m / min
4.Bag yin nisa≤800mm
5.Discharge gas fadada shaft: 3 inci
6.Power ƙarfin lantarki: 22v-380v, 50Hz
7.Total iko: 20KW
8.Mai nauyi: 1.5T
-
Air Column matashin injin nannade Rolls
Babban sigogin fasaha na matashin ginshiƙi na Air Column Wrap Rolls yin inji:
1. An tsara wannan na'ura ta musamman don samar da jaka-jita na PE-PA.
2. Matsakaicin girman fitarwa shine 1200mm, kuma diamita mara nauyi ba ta wuce 650mm ba.
3. Na'ura na iya samar da jaka 50-90 a minti daya.
4. Gudun inji na inji zai iya kaiwa 110 bags / min.
5. Jakar yin nisa yana iyakance zuwa 1200mm, kuma matsakaicin tsayin jaka shine 450mm.
6. Girman ma'aunin haɓakar haɓakar shayewa shine inci 3.
7. Zai iya zama mai jujjuya kai tare da bobbin inci 2.
8. Ya kamata a kiyaye ƙarfin wutar lantarki na injin tsakanin 22 volts zuwa 380 volts, kuma mitar ya zama 50 Hz.
-
Fedex takarda padded jakar wasiƙa mai yin inji
Bayan-sayar Sabis
1. Duk samfuran suna da garantin 1 shekara.
2. Masu sana'a da ƙwararrun injiniyoyi suna ba da taimako a kan shafin.
3. 24/7 tallafin kan layi don magance kowace tambaya a kowane lokaci.
4. Samar da shigarwa, gwaji da sabis na horo.
5. Taimakon Fasaha da Garanti na Rayuwa.
-
Takarda Air kumfa fim yin inji
Main fasaha sigogi na takarda iska matashi jakar mirgine yin inji EVS-800:
1. Wannan na'ura ya dace da sarrafa PE ƙananan kayan aiki da kayan aiki mai mahimmanci na PE.
2. Nisa mara nauyi bai fi 800mm ba, kuma matsakaicin matsakaicin raguwa shine 750mm.
3. Gudun yin jakar jaka shine jaka 135-150 / min.
4. Gudun inji zai iya kaiwa 160 fakiti / min.
5. Matsakaicin girman jakar jakar shine 800mm, kuma tsawon jakar shine 400mm.
6. Matsakaicin diamita na shingen fadada shayewa shine inci 3.
7. Tare da aikin iska ta atomatik, yana iya sarrafa kayan aiki tare da diamita na 2 inci.
8. Hakanan ana iya raunata shi da kansa, kuma yana iya ɗaukar kayan da diamita na inci 3.
9. Wutar lantarki yana tsakanin 220V-380V, 50Hz.
10. Jimlar ƙarfin injin yana buƙatar zama 15.5KW.
11. Nauyin inji na duka injin shine 3.6 ton.
-
kraft Paper embossed bubble mailer jakar yin inji
Babban Siffofin
1) Tsarin sauƙi a nau'in layi, mai sauƙi a shigarwa da kulawa.
2) Amincewa da abubuwan haɓaka shahararrun samfuran samfuran duniya a cikin sassan pneumatic, sassan lantarki da sassan aiki.
3).Ƙarfi kuma mai tsabta tare da manne ruwa mai inganci da tsada
4) Gudu a cikin babban aiki da kai da kaifin basira, yanayin yanayi -
Injin nadawa takarda ta atomatik
Mu ne Jagoran mai ba da kayan injin fanfold takarda ta atomatik.Tare da ƙungiyar ƙwararrunmu, muna kera injin ɗin nada takarda mai inganci wanda yake da ƙarfi, ƙarami, rashin jin zafi da sauƙin ɗaukar ƙira.
2, Gabatarwa na atomatik takarda nadawa inji
Injin naɗewa takarda ta atomatik yana ninka jujjuyawar takarda don zama dauren takarda sannan a yi amfani da tsarin cikawar takarda don sanya takarda cikin kushin takarda tare da aiki kamar cikawa, nannade, padding da takalmin gyaran kafa.Fakitin takarda na fanfold madadin yanayin yanayi ne zuwa ga kumfa filastik, Biodegradable, Maimaituwa, Taki, Maimaituwa.Yana haifar da ƙarancin tasiri ga muhalli.Maɓallin kullin takarda mai faɗaɗawa don kullin kumfa na filastik.
-
Layin samar da ambulaf ɗin zuma
Amfani:
Babban 1sta kasar Sin
Ikon nesa kan layi bayan tallace-tallace 7x24h
STsarin Delta Servo System
Dmai sarrafa masana'anta
Babban KanfigareshanofLayin samar da ambulaf ɗin zuma
Babban tsarin injina ya haɗa da:
1, Main iko allon
2, Ƙarshen ɓangaren tarin kayan aiki
3, Yanke sashen
4,Siffata jakar ƙarshe
5.Sashin fesa Man Fesa
6 sassa masu ninke
7.Latsa dacewa bayan fara fesa
8, Sashin kwancewa
-
Corrugated matashin ambulan yin inji
1) Tsarin sauƙi a cikin nau'in layi, mai sauƙi a shigarwa da kiyayewa.
2) Amincewa da abubuwan haɓaka shahararrun samfuran samfuran duniya a cikin sassan pneumatic, sassan lantarki da sassan aiki.
3).Ƙarfi kuma mai tsabta tare da manne ruwa mai inganci da tsada
4) Gudu a cikin babban aiki da kai da kaifin basira, yanayin yanayi -
Injin Yin Jakar Bubble Ta atomatik
Babban sigogin fasaha na Jakar kumfa ta atomatik Mai sarrafa injin EVS-800:
1. Wannan na'ura na iya aiwatar da duka PE ƙananan kayan aiki da kayan aiki mai mahimmanci na PE.
2. An tsara wannan na'ura don ɗaukar kayan aiki tare da nisa mai nisa har zuwa 800mm da diamita na kwance har zuwa 750mm.
3. Gudun jakar injin yana tsakanin 135-150 jaka / min.
4. Mafi girman jakar injin yin saurin wannan injin shine jaka 160 / min.
5. Wannan na'ura na iya samar da jaka tare da iyakar nisa na 800mm da tsawon 400mm.
6. Diamita na shaft fadada shaft na wannan inji ne 3 inci.
7. Jujiyar jakar atomatik tare da shaft 2 inch.
8. Hakanan za'a iya raunata shi da kansa ta amfani da shaft 3-inch.
9. Injin yana buƙatar ƙarfin wutar lantarki na 22v-380v 50Hz.
10. Jimlar ikon amfani da injin shine 15.5KW.11. Nauyin inji na duka injin shine 3.6T.
-
Injin nadawa takarda na siyarwa
Ƙarshen kariya ga kayan ku
Yana canza jujjuyawar takarda zuwa dam ɗin takarda cikin sauƙi
High gudun takarda hira ga sauri motsi ayyuka
Yin lodi da yankan takarda ta atomatik
2, GabatarwaofInjin nadawa takarda na siyarwa
Injin naɗewa takarda don siyarwa yana ninka jujjuyawar takarda don zama dauren takarda sannan a yi amfani da tsarin cika takarda don sanya takarda a cikin matashin takarda tare da aiki kamar ciko, nannade, padding da takalmin gyaran kafa.Fakitin takarda na fanfold madadin yanayin yanayi ne zuwa ga kumfa filastik, Biodegradable, Maimaituwa, Taki, Maimaituwa.Yana haifar da ƙarancin tasiri ga muhalli.Maɓallin kullin takarda mai faɗaɗawa don kullin kumfa na filastik.
